Home > Manufacturers >

Fullriver Full Force Series FFD160-12 160Ah 12VDC Sealed Deep Cycle AGM Battery

Fullriver Full Force Series FFD160-12 160Ah 12VDC Sealed Deep Cycle AGM Battery
Save 5% with code AMERICA5

 
Our Price: $416.18


Product Code: FFD160-12


Terms and Conditions*:
I agree to the Shipping & Delivery Policy.

Qty:  
Description Document(s)
 

Fullriver Full Force Series FFD160-12 160Ah 12VDC Sealed Deep Cycle AGM Battery

Manufacturer Part#: FFD160-12

The Full Force Series AGM is a general-purpose battery. Like all of the batteries in the Fullriver line-up, Full Force is designed to meet the highest standards. The batteries incorporate thick-plates of pure virgin lead (99.994%), in a tough case with zero chance of leaks or spills. For use in almost any application, the battery pairs well with general-purpose needs like Marine and RV.

  • Long Lifespan: Full Force AGM batteries typically last longer than their wet cell counterparts due to 99.994% pure virgin lead, thick plates, and maintenance-free design. The FFD Series offers approx. 800 cycles @ 50% DOD.
  • Fast Charging: AGM technology’s low ESR allows for charge rates up to 35% of total Ah for faster charging.
  • Built Stronger: Full Force AGM is built with thick pure lead plates and Over-The-Partition welds which greatly increase resistance to vibration and shock.
  • Flexible Installation: AGM batteries can be installed in any orientation, except upside-down, which allows you to fit them in places traditional wet cell batteries can’t. AGM batteries are recombinant and do not off-gas like traditional wet cell batteries which means you can mount them within the cabin.
Specifications

Full data sheet can be found in the Document(s) tab above.

Electrical Specifications
Nominal Voltage 12 Volt
C100 176Ah
C20 160Ah
C10 150Ah
C5 130Ah
CCA 910 Amps
CA or MCA 1070 Amps
Internal Resistance 3.8m Ω
Cycling Capacity
20 Hour Rate 160 Amp Hours
Reserve Capacity
Reserve @25 Amps 300 Minutes
Reserve @75 Amps 82 Minutes
Mechanical Specifications
Group Size DIN
Terminal Type M8
Terminal Torque 5.8 - 6.7 ft/lbs 62 - 80 lbs/in
7-9 Nm
Dimensions - Inches (mm) + Weight
Height (w/ terminal) 9.45 (240)
Height (case only) 9.45 (240)
Width 6.69 (170)
Length 18.98 (482)
Weight lbs. (kg) 99.20 (45)
Case Type ABS Plastic - Flame Res.
Rating UL94-HB

Share your knowledge of this product. Be the first to write a review »