Frequently Asked Questions
What is the Crown 6CRV330 battery?
The Crown 6CRV330 is a 6VDC deep cycle AGM battery rated at 330Ah at the 20-hour rate. It is part of Crown's sealed deep cycle AGM line and is designed for renewable energy storage and other applications requiring repeated charging and discharging.
Is the Crown 6CRV330 suitable for an off-grid solar system?
Yes. The Crown 6CRV330 is designed for renewable energy applications and can be used as part of an off-grid solar battery bank. Its sealed AGM construction is particularly useful when regular watering is not desired.
How much energy can one Crown 6CRV330 store?
Crown rates the 6CRV330 at 1.92 kWh of storage at the 20-hour rate. The actual usable energy in a solar installation will depend on discharge conditions, battery temperature, system design, state of charge, and allowable depth of discharge.
What does the 330Ah rating mean on the Crown 6CRV330?
The 330Ah rating is the battery's amp-hour capacity measured at the 20-hour rate. Capacity can vary with discharge rate, which is why Crown also publishes a 5-hour capacity rating for this model.
How many Crown 6CRV330 batteries are needed for a solar battery bank?
The required quantity depends on the system voltage and the amount of storage needed. Since each battery is 6VDC, common series configurations include:
- Two Crown 6CRV330 batteries in series for a 12VDC battery bank
- Four Crown 6CRV330 batteries in series for a 24VDC battery bank
- Eight Crown 6CRV330 batteries in series for a 48VDC battery bank
Additional parallel strings can increase total battery-bank capacity. The complete bank should be designed around the inverter, charge controller, solar array, daily load, and required backup time.
Charging & Maintenance
How should the Crown 6CRV330 be charged in a solar system?
The Crown 6CRV330 should be charged using a charging system configured for AGM batteries and according to Crown's charging requirements. The solar charge controller should use an appropriate AGM charging profile rather than a profile intended specifically for flooded batteries.
Does the Crown 6CRV330 require watering?
No. The Crown 6CRV330 uses sealed AGM technology and does not require the routine electrolyte watering associated with flooded lead acid batteries. This reduces the maintenance required during normal operation.
Does the Crown 6CRV330 need regular maintenance?
Although it does not require watering, the battery bank should still be inspected periodically. Check the battery case, connections, cables, charging equipment, and operating environment. Keeping terminals and connections in good condition is important for reliable system operation.
Can the Crown 6CRV330 remain partially discharged for long periods?
It is better to recharge the battery after use rather than leaving it at a low state of charge for extended periods. Proper charging and avoiding prolonged undercharging can help maintain battery capacity and service life.
Can the Crown 6CRV330 be used with a flooded lead acid battery in the same bank?
Mixing battery technologies in the same battery bank is not recommended. AGM and flooded batteries have different charging requirements, so a properly matched battery bank should use compatible batteries of the same type, voltage, capacity, age, and condition whenever possible.
Crown Battery Comparison
What is the difference between the Crown 6CRV330 and Crown 6CRV260?
The Crown 6CRV330 and Crown 6CRV260 are both 6VDC sealed AGM batteries, but the Crown 6CRV330 provides greater capacity. The 6CRV330 is rated at 330Ah and 1.92 kWh at the 20-hour rate, while the 6CRV260 is rated at 260Ah. The 6CRV330 is also larger and heavier, so it is better suited when additional storage is more important than minimizing battery size and weight.
|
Specification
|
6CRV260
|
6CRV330
|
|
Voltage
|
6VDC
|
6VDC
|
|
Capacity (20 Hr)
|
260Ah
|
330Ah
|
|
Dimensions
|
10.24 x 7.13 x 11.38 in (26.0 x 18.1 x 28.9 cm)
|
11.62 x 7.01 x 14.59 in (29.5 x 17.8 x 37.1 cm)
|
|
Weight
|
79 lbs (35.7 kg)
|
103 lbs (46.7 kg)
|
|
Terminal Type
|
Dual post/Stud combination
|
Dual post/Stud combination
|
How does the Crown 6CRV330 compare with Crown 6CRV390?
The Crown 6CRV330 and Crown 6CRV390 are both 6VDC sealed AGM batteries. The Crown 6CRV390 provides 390Ah at the 20-hour rate compared with 330Ah for the Crown 6CRV330, giving it more rated storage. The 6CRV330 may be preferable where the available height or total battery weight is a concern.
|
Specification
|
6CRV330
|
6CRV390
|
|
Voltage
|
6VDC
|
6VDC
|
|
Capacity (20 Hr)
|
330Ah
|
390Ah
|
|
Dimensions
|
11.62 x 7.01 x 14.59 in (29.5 x 17.8 x 37.1 cm)
|
11.62 x 7.01 x 16.75 in (29.5 x 17.8 x 42.5 cm)
|
|
Weight
|
103 lbs (46.7 kg)
|
127 lbs (57.6 kg)
|
|
Terminal Type
|
Dual post/Stud combination
|
Dual post/Stud combination
|
Solar Application & Battery Life
What type of solar system is the Crown 6CRV330 best suited for?
The Crown 6CRV330 is a practical option for off-grid and backup solar systems that require a 6VDC AGM battery bank. Its 330Ah capacity makes it suitable for larger storage requirements than lower-capacity 6VDC AGM models.
Can the Crown 6CRV330 be used for backup power?
Yes. Its deep cycle AGM construction makes it suitable for backup power applications where the battery is charged and discharged as part of the system. The required number of batteries depends on the inverter voltage and the amount of backup energy required.
Is the Crown 6CRV330 a good choice when battery maintenance needs to be low?
Yes. Its sealed AGM construction removes the need for routine watering, making it a useful choice for solar installations where regular battery servicing is inconvenient.
How does temperature affect the Crown 6CRV330 in a solar system?
Battery performance and service life can be affected by operating temperature. Keeping the battery within Crown's recommended operating conditions and avoiding excessive heat can help maintain expected performance.
How can I get the best service life from the Crown 6CRV330?
Use an AGM-compatible charging profile, maintain proper charging, avoid prolonged low states of charge, prevent unnecessary deep discharges, and keep the battery installation within appropriate temperature and operating conditions. Proper sizing of the solar array, charge controller, inverter, and battery bank is also important.
Read Less