Home > Manufacturers >

Battle Born BB5024H 50Ah 24VDC Deep Cycle Lithium Iron Phosphate (LiFePO4) Battery w/ Internal Heating Solution

Battle Born BB5024H 50Ah 24VDC Deep Cycle Lithium Iron Phosphate (LiFePO4) Battery w/ Internal Heating Solution

Alternative Views:

Our Price: $974.00

Product Code: BB5024H

Description Document(s)

Battle Born BB5024H 50Ah 24VDC Deep Cycle Lithium Iron Phosphate (LiFePO4) Battery w/ Internal Heating Solution

Manufacturer Part#: BB5024H

The powerful battery solution to elevate any outdoor adventure. It’s time to upgrade from your traditional lead acid battery! What you need is a new battery that’s lighter, safer, and works with various systems. More importantly, it should be able to keep you company for many of your outdoor adventures! This 50Ah 24V LiFePO4 Heated Deep Cycle Battery by Battle Born Batteries delivers superior and long-lasting performance!

Our lithium-ion batteries are designed for long-term use and can last up to 10 times longer than lead-acid batteries, with 3,000-5,000 deep discharge cycles. These LiFePO4 batteries also have an internal Battery Management System (BMS), which protects them from common battery failures like high and low voltage, short circuits, and hot and cold temperatures. Compared to a conventional lead acid battery, our rechargeable Battle Born Batteries are 1/5th the weight for the same amount of usable power, weighing in at just 31 lbs. They, too, provide up to 3x more power in the same physical space, and charge 5x faster.

With maximum safety, flexibility, and versatility, these LiFePO4 batteries can be wired in series or parallel and installed in any position, orientation, or space. Battle Born Batteries are made with quality in mind. We source our raw materials from reputable suppliers and assemble lithium batteries using cylindrical cells in our 99,000-square-foot facility in Reno, Nevada.

More details about our LiFePO4 deep cycle batteries:

  • Dimensions: 12.76 × 6.86 × 8.95 in
  • Certified for UL-2054, UL-62133, and UN38.8 compliant
  • Ships with 18-8 stainless steel 5/16 – 18 1” and 1-1/4” bolts, brass washers, and 18-8 stainless steel nuts with nylon inserts

These Battle Born Batteries heated battery kits offer our:

  • 50Ah 24VDC Heated Battle Born Batteries
  • Heat Battery Kits
  • Heat Battery Jumper Wires
  • Heat Battery Add-on Kits

The 50Ah 24V LiFePO4 Heated Deep Cycle Battery uses a proprietary, low-draw technology to keep your battery warm and ready to charge no matter what weather you may face. The stable chemistry and built-in battery management system help provide you with safe and reliable power on your adventures. The Heat Battery Kits come with an enable switch and necessary wires so that you can enable and disable your heated battery from anywhere in your system. Included is the Heat Battery Jumper Wire which allows you to directly enable the heated element from your battery if you do not wish to use the Heat Battery Kit.


Full data sheet can be found in the Document(s) tab above.

Electrical Specification
Voltage 24V
Capacity 50Ah
Operating Temperature - 4°F to 135°F
( - 20°C to 57.2°C )
Efficiency 99 %
Self Discharge 2-3 % per month
Maximum Series Voltage 48V
Cycles 3K - 5K
Built-in BMS Internal
Resistance 25 mΩ
Usable DoD 100 %
Charging Specification
Recommended Charge Current .5c
Max Charge Current 25A
Absorption Voltage 28.4V - 29.2V
Float Voltage 26.8V - 27.6V
Absorption Time 15 Minutes per 50Ah
battery bank
BMS Charge Current
.5C Recommended
Recharge / Rebulk Voltage 26.6V
BMS Cell Balancing
Voltage Range
28.4V - 29.2V
High BMS Voltage Protection 29.4VDC
Temperature Compensation No/Disable
Recognized Specification
Certifications Pending
Shipping Class UN3480, Class 9
Discharging Specification
Max Discharge Current 50A
Peak Discharge Current 100A for 30 Seconds
Surge for Loads over 500A .5 Seconds
Recommended LVD 21V
BMS Discharge Voltage Cut-Off 20V
Reconnect Voltage 20V
Short Circuit Protection Yes
Mechanical Specification
(L x W x H)
12.76 x 6.86 x 8.95 inch
Weight 31 lbs
Terminal Type .25-inch Brass
Terminal Hole 3/8-inch hole and 3/8-inch
or 5/16-inch hardware is suggested
Terminal Torque 9-11 Ft-lb
Case Material ABS Fire Rated
Cell Type - Electrolyte LiFeP04
Sealed and Water
Resistant Case
Heat Proprietary Internal Heating Solution
Heat Enable Terminal Female M4 Thread
Temperature Specification
Discharge Temperature - 4°F to 135°F
( - 20°C to 57.2°C )
Charge Temperature 25°F - 135°F
Storage Temperature - 10°F to 140°F
( - 23°C to 60°C )
BMS High Temperature Cut-Off 135°F
BMS Reconnect Temperature 135°F

Share your knowledge of this product. Be the first to write a review »