 |
 |
 |
|
Hanwha Q CELLS Q.PEAK-DUO-L-G8.2-430 430Watt 144 1/2 Cells BoW Monocrystalline 35mm Silver Frame Solar Panel
Manufacturer Part#: Q.PEAK-DUO-L-G8.2-430
The newest, high-performance Q.ANTUM DUO solar module Q.PEAK DUO L-G8.2 430 is the ideal solution for commercial and utility applications thanks to a combination of its innovative cell technology Q.ANTUM DUO and cutting edge cell interconnection. This 1500VDC IEC/UL solar module with its 12 busbar cell design insures superior yields while having a very low LCOE. The Q.PEAK DUO L-G8.2 430 is powered by 144 Q.ANTUM DUO Half Cell Mono solar cells and was specially designed for large solar power plants to reduce BOS costs, however, it can also be installed on residential roofs and in residential ground arrays. Only Q CELLS offers German engineering quality with their unique triple Yield Security.
The Q.ANTUM DUO Technology developed by Q CELLS is based on their original Q.ANTUM Technology and further cell separation technology with round wires. In addition, 12 busbar, half cell, and wire interconnection deliver not only superior performance, but also overwhelmingly beautiful aesthetics. Q.ANTUM DUO Technology reduces both electrical and optical losses by halving the current passing through each cell while making use of incident light more effectively. Q CELLS decided to focus on all of the key determinants of performance, not just the ones that make their datasheets look good. By enhancing low-light performance and also the output of the modules across a range of temperatures, you will be sure to achieve higher profits.
Features
- Q.ANTUM Technology: Low Levelized Cost Of Electricity - Higher yield per surface area, lower BOS costs, higher power classes, and an efficiency rate of up to 20.3%
- Innovative All-Weather Technology - Optimal yields, whatever the weather with excellent low-light and temperature behavior
- Enduring High Performance - Long-term yield security with Anti LID Technology, Anti PID
Technology
1, Hot-Spot Protect and Traceable Quality Tra.Q™
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specifications
Full data sheet can be found in the Document(s) tab above.
Electrical Characteristics
Minimum performance at standard test conditions, STC1 (Power Tolerance +5W / -0W)
|
|
Power at MPP1 (Pmpp)
|
[W]
|
430
|
|
Short Circuit Current1 (Isc)
|
[A]
|
10.83
|
|
Open Circuit Voltage1 (Voc)
|
[V]
|
49.33
|
|
Current at MPP (Impp)
|
[A]
|
10.31
|
|
Voltage at MPP (Vmpp)
|
[V]
|
41.70
|
|
Efficiency1 (η)
|
[%]
|
≥ 20.1
|
Electrical Characteristics
Minimum Performance At Normal Operating Conditions, NMOT2
|
|
Power at MPP (Pmpp)
|
[W]
|
322.0
|
|
Short Circuit Current (Isc)
|
[A]
|
8.72
|
|
Open Circuit Voltage (Voc)
|
[V]
|
46.52
|
|
Current at MPP (Impp)
|
[A]
|
8.12
|
|
Voltage at MPP (Vmpp)
|
[V]
|
39.67
|
1Measurement tolerances Pmpp ±3%; Isc; Voc ±5% at STC: 1000W/m2, 25±2°C, AM 1.5 according to IEC 60904-3
2800W/m2, NMOT, spectrum AM 1.5
|
Mechanical Characteristics
|
|
Cell Type
|
6 x 24 Monocrystalline Q.ANTUM Solar Half Cells
|
Dimensions
(L x W x H)
|
81.9 x 40.6 x 1.38 in
2,080 x 1,030 x 35 mm
|
|
Weight
|
25.0 kg / 55.1 lbs
|
|
Front Cover
|
0.13 in (3.2 mm) thermally pre-stressed glass with anti-reflection technology
|
|
Back Cover
|
Composite film
|
|
Frame Type
|
Anodized Aluminum
|
|
Cable
|
4 mm2 Solar cable; (+) ≥ 55.1 in (1,400 mm), (−) ≥ 55.1 in (1,400 mm)
|
|
Connector Type
|
Stäubli MC4-Evo2, Hanwha Q CELLS HQC4, Amphenol UTX, Renhe 05-8, JMTHY JM601A; Tongling Cable01S-F, IP68 or Friends PV2e; IP67
|
|
Junction Box
|
2.09-3.98 × 1.26-2.36 × 0.59-0.71 in (53-101 × 32-60 × 15-18 mm), IP67, with bypass diodes
|
|
|
|
|
|
|
|